TMS320F28027PTT Texas Instruments new in stock,onlinesales
TMS320F28027PTT
Features
High-Efficiency 32-Bit CPU (TMS320C28x)
60 MHz (16.67-ns Cycle Time)
50 MHz (20-ns Cycle Time)
40 MHz (25-ns Cycle Time)
16 × 16 and 32 × 32 MAC Operations
16 × 16 Dual MAC
Harvard Bus Architecture
Atomic Operations
Fast Interrupt Response and Processing
Unified Memory Programming Model
Code-Efficient (in C/C++ and Assembly)
Endianness: Little Endian
Low Cost for Both Device and System:
Single 3.3-V Supply
No Power Sequencing Requirement
Integrated Power-on and Brown-out Resets
Small Packaging, as Low as 38-Pin Available
Low Power
No Analog Support Pins
Clocking:
Two Internal Zero-Pin Oscillators
On-Chip Crystal Oscillator and External Clock Input
Watchdog Timer Module
Missing Clock Detection Circuitry
Up to 22 Individually Programmable, Multiplexed GPIO Pins With Input Filtering
Peripheral Interrupt Expansion (PIE) Block That Supports All Peripheral Interrupts
Three 32-Bit CPU Timers
Independent 16-Bit Timer in Each Enhanced Pulse Width Modulator (ePWM)
On-Chip Memory
Flash, SARAM, OTP, Boot ROM Available
Code-Security Module
128-Bit Security Key and Lock
Protects Secure Memory Blocks
Prevents Firmware Reverse Engineering
Serial Port Peripherals
One Serial Communications Interface (SCI) Universal Asynchronous Receiver/Transmitter (UART) Module
One Serial Peripheral Interface (SPI) Module
One Inter-Integrated-Circuit (I2C) Module
Enhanced Control Peripherals
ePWM
High-Resolution PWM (HRPWM)
Enhanced Capture (eCAP) Module
Analog-to-Digital Converter (ADC)
On-Chip Temperature Sensor
Comparator
Advanced Emulation Features
Analysis and Breakpoint Functions
Real-Time Debug Through Hardware
Package Options
38-Pin DA Thin Shrink Small-Outline Package (TSSOP)
48-Pin PT Low-Profile Quad Flatpack (LQFP)
Temperature Options
T: –40°C to 105°C
S: –40°C to 125°C
Q: –40°C to 125°C
(AEC Q100 Qualification for Automotive Applications)
Description
C2000™ 32-bit microcontrollers are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Delfino™ Premium Performance family and the Piccolo™ Entry Performance family.
The F2802x Piccolo™ family of microcontrollers provides the power of the C28x core coupled with highly integrated control peripherals in low pin-count devices. This family is code-compatible with previous C28x-based code, and also provides a high level of analog integration.
An internal voltage regulator allows for single-rail operation. Enhancements have been made to the HRPWM to allow for dual-edge control (frequency modulation). Analog comparators with internal 10-bit references have been added and can be routed directly to control the PWM outputs. The ADC converts from 0 to 3.3-V fixed full-scale range and supports ratio-metric VREFHI/VREFLO references. The ADC interface has been optimized for low overhead and latency.
To learn more about the C2000 MCUs, visit the https://www.kaimte.com/product/details/ti-texas-instruments/tms320f28027ptt.html
Send RFQ:https://www.kaimte.com/inquiry.html
Venus
EMAIL:Venus@kaimte.com
SKYPE: Kaimte.venus
TEL: 0086-755-82565106
FAX: 0086-755-82569997